Wire Harness

Key Specifications/Special Features:

• Cable used in low voltage circuits in automobiles (vehicles and motorcycles)
• Material and structure: the electric conductor shall be a strand consisting of the annealed copper wire specified in JIS C3102
• Insulator: the electric conductor specified in Item 2.1 shall be coated with vinyl concentrically
• The average thickness of the insulator shall be 90% minimum of the values specified in table
• 80% minimum of the values specified in table one shall be provide at the area of the minimum thickness
• Cable color marking (stripes): two straight lines shall be indicated on the cable surface in the axial direction by imperishable way
• The marking width shall be 0.5 to 1.3mm
• Quoted standards
• Nissan design specification
• JIS C3005: testing method for plastic insulated wires and cables
• JIS C3102: annealed copper wires for electrical purposes
• JIS Z8721: specification of colors according to their three attributes
• JASO D611: low tension cables with thin wall insulation for automobiles
• JASO D618: hard drawn steel wires
• 24028NDS00: ability test of low voltage electric wires for automobile
• OEM orders are welcome